Weddle front nosecone bushing seal holder for 16.6mm ID nosecone. This fits the 16.6mm ID shifter hockey stick hole on 1969-later Beetle and Bus transaxles. Nosecones are often swapped on transmissions so measure your bushing hole size if you are not sure.
Tech Tip:Transaxle nosecones were made with a 17mm bushing hole from 1949-68, then were made with a 16.6mm bushing hole from 1969-on. Nosecones are often and easily swapped over the years, so recommended you measure or purchase both seal holders if you are not sure which nosecone you have.
Weddle 001301209, 001-301-209
Tech Tip:Transaxle nosecones were made with a 17mm bushing hole from 1949-68, then were made with a 16.6mm bushing hole from 1969-on. Nosecones are often and easily swapped over the years, so recommended you measure or purchase both seal holders if you are not sure which nosecone you have.
Weddle 001301209, 001-301-209
| SKU | WED-001301209 |

Recently Viewed Products
- Choosing a selection results in a full page refresh.
- Opens in a new window.

Subscribe to The Latest Dirt