Collection: Engine

DBW Gasket from Oil Pump to Engine Case for VW Type 1 - 111115111BLearn More

Empi Oil Pump Cover Gasket Only for VW Type 1 - 9207-5Learn More

Empi Black Lower Pulley Engine Tin for VW Type 1 - 8935Learn More

Empi Black Doghouse Rear Engine Tins for VW Type 1 - 8884Learn More

Empi Install Kit for Bolt-On Valve Covers - 9086Learn More

DBW M10 x 1.5 Engine Mounting Nut for VW Type 1 And Type 4 - N110102Learn More

Euromax oil pump cover plate with 8mm holes. This plate fits 1966-79 Beetle, Ghia, Thing, and Type 3, and fits 1963-71 Bus with the upright Type 1 ...Learn More

Genuine VW steel crankshaft timing gear. Fits 40-60hp 1300-1600cc Type 1 engines used in 1961-79 Beetle, Karmann Ghia, Type 3, Thing, and Bus with ...Learn More

Empi 2100lb Stage 2 Pressure Plate for VW Type 1 w/2mm Clutch - 4082Learn More

Empi Angled Billet Oil Filler with Screw On Cap and Vent for VW Type 1 - 7912Learn More

Empi Bolt On Sand Seal Stock Size Pulley for VW Type 1 - 8688Learn More

Empi Chrome Crank Pulley Bolt and Washer for VW Type 1 - 9117Learn More

These blue and gold anodized pushrod tubes can be adjusted to fit tightly between the cylinder heads and engine case. Adjustable pushrod tubes also...Learn More

Empi Billet Aluminum Oil Sump Drain Plate Kit for VW Type 1 - 16-8964Learn More

Empi Chrome Cylinder Cool Tins for VW Type 1 and Type 3 - Pair - 8933Learn More

Engine Case Assembly Hardware Kit for Dual Oil Relief VW Type 1 - 113198033Learn More

Empi Chrome Magnetic Drain Plug for VW Type 1 - 8856Learn More

Empi Aluminum Clip-On Valve Covers for VW Type 1 - Pair - 9138Learn More

Replacement exhaust stud 8mm x 1.25mm thread x 38mm long. Very common in the VW engine and trans, you can use anywhere the dimensions will work. ...Learn More