California Prop 65 Warning:
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Description
- Additional Information
- Reviews
EMPI Long Block Engines are hand assembled in Southern California with ALL NEW ALL EMPI matched and approved components by VW racing legend Jack Sacchette. Available in three standard configurations for Type 1, 2 or 3 applications. No core required, no long lead times-get your Classic VW back on the road today!
Every EMPI Long Block comes with a 12 month or 12K mile warranty. Blocks are intended for stock applications - not built for racing, off road, or implement use.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek. All Empi long blocks include stock camshaft specs at .334in lift and 250 duration, with high performance, stock ratio 1.1:1 rockers.
1776cc Long Blocks include new AutoLinea-EMPI HD aluminum cases and EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
Empi 98-0482-B
**Empi Long Blocks are stored at Empi and feature free shipping to the lower 48 States.**
NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0482-B
ENGINE CASE- AutoLinea, Standard, Stock Aluminum Engine Case
CRANKSHAFT- Direct Drilled, 69mm Stroke
RODS- OE Specification
CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
LIFTERS- Precision Ground and Heat Treated, 28mm
FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
GLAND NUT- Chromoly, Heavy Duty
MAIN BEARINGS- Standard, Steel Center
ROD BEARINGS- Standard
CAM BEARINGS- Standard Thrust
OIL PUMP- Schadek, 26mm with Cover
HEAD STUDS- Chromoly, 8mm with Nuts
PISTONS & CYLINDERS- OE Specification, 90.5mm Diameter, 7.2:1 Compression Ratio
PUSHROD TUBES- Stock Style
HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
ROCKERS- High Performance, Stock 1.1:1 Ratio
VALVE COVER- Stock Steel Style, Black
GASKETS- Elring Engine Gasket Set
Every EMPI Long Block comes with a 12 month or 12K mile warranty. Blocks are intended for stock applications - not built for racing, off road, or implement use.
EMPI Long Blocks are assembled with name brand components from AA Performance Products, AutoLinea, Elring, EMPI, OSVAT, Mahle, Manton, Silverline and Schadek. All Empi long blocks include stock camshaft specs at .334in lift and 250 duration, with high performance, stock ratio 1.1:1 rockers.
1776cc Long Blocks include new AutoLinea-EMPI HD aluminum cases and EMPI High Performance cylinder heads with S/S valves, chromoly retainers and EMPI proprietary 3 angle valve job performed on a Rottler valve machine at EMPI in Anaheim, California.
Empi 98-0482-B
**Empi Long Blocks are stored at Empi and feature free shipping to the lower 48 States.**
NOTE: Aluminum Cases must use a steel hub pulley or an aluminum Bolt-in Sand Seal Pulley Kit.
EMPI PART NUMBER- 98-0482-B
ENGINE CASE- AutoLinea, Standard, Stock Aluminum Engine Case
CRANKSHAFT- Direct Drilled, 69mm Stroke
RODS- OE Specification
CAMSHAFT- Stock Cam, .334" Lift, 250º Duration
LIFTERS- Precision Ground and Heat Treated, 28mm
FLYWHEEL- Stock Style, 4 Dowel Pin, 200mm
GLAND NUT- Chromoly, Heavy Duty
MAIN BEARINGS- Standard, Steel Center
ROD BEARINGS- Standard
CAM BEARINGS- Standard Thrust
OIL PUMP- Schadek, 26mm with Cover
HEAD STUDS- Chromoly, 8mm with Nuts
PISTONS & CYLINDERS- OE Specification, 90.5mm Diameter, 7.2:1 Compression Ratio
PUSHROD TUBES- Stock Style
HEADS- EMPI High Performance Dual Port Cylinder Head, 90.5 / 92mm Bore, 35.5 Intake x 32mm Exhaust S/S Valves, Single Hi-Rev Valve Springs, Chromoly Retainers, 3 Angle Valve Job Completed on Precision Rottler Seat & Guide Machine at EMPI Anaheim
PUSHRODS- Manton 11.500" OAL x 3/8" Diameter x .035" Wall Thickness
ROCKERS- High Performance, Stock 1.1:1 Ratio
VALVE COVER- Stock Steel Style, Black
GASKETS- Elring Engine Gasket Set
| SKU | EMP-98-0482-B |